50 šarafa sa maticama i podlogama za ugradnju opreme u standardne ormare

Suitable for Patch Cords with RJ11/RJ12/RJ45 & BNC connector, Tester with Master & Rmote unit, Suitable for old (BNC) and new (RJ45) patch cords, Various LEDs for status:, Loop-Back: localization of laid network cables, Continuity: of network or communication cables, Open: disconnected single wires, Shorts: short circuited single wires, Miss-Wire: Identification of non conform wire assigment, Powered by 1x 9 Volt block battery (not included)

EN 50173-1, ISO/IEC 11801, EIA/TIA 568 B.2

EN 50173-1, ISO/IEC 11801, EIA/TIA 568 B.2

UTP 3m CP1062S

CAT5e Patch Cable U/UTP 3m CP1063U Black

UTP 0.25m CP1012U

UTP 0.25m CP1012U

EN 50173-1, ISO/IEC 11801, EIA/TIA 568 B.2

EN 50173-1, ISO/IEC 11801, EIA/TIA 568 B.2

4 x 2 AWG24/1, Twisted Pair, According to the standards: EIA/TIA 568 B.2, EN 50173-1, ISO/IEC 11801

EN 50173-1, ISO/IEC 11801, EIA/TIA 568 B.2

.

Patch cord; RJ45 plug,both sides; U/UTP; 6; stranded; Cu; LSZH.

RJ45 Patch Cable 6, U/UTP, 26/7 AWG, Unshielded Twisted Pair Cable, Bare copper wire, LSZH (low smoke zero halogen) Jacket, ISO/IEC 11801, EN50288 and TIA/EIA-568-B.2-1

EN 50173-1, ISO/IEC 11801, EIA/TIA 568 B.2

RJ45 Patch Cable 6, U/UTP, 26/7 AWG, Unshielded Twisted Pair Cable, Bare copper wire, LSZH (low smoke zero halogen) Jacket, ISO/IEC 11801, EN50288 and TIA/EIA-568-B.2-1

Multi Modular 8/6/4P